YCL8 Control Relay

General

■Applications

-Designed for monitoring level in wellss,basins,reservoirs,tanks……

■Function Features

-In one device you can choose the following configurations:

   -2level control mode

   -1level control mode

-Choice of function PUMP UP,PUMP DOWN.

-Adjustable time delay on the output(0.1-10s).-Sensitivity adjustable by a potentiometer(5-100kΩ).

-Galvanically separated supply voltage AC/DC 24-240V.

-Relay status is indicated by LED.

-1-MODULE,DIN rail mounting.

 

Technical parameters

Technical parameters	YCL8-02		YCL8-03
Function                        2level contorl mode        2 or 1 level contorl mode
Supply terminals		A1-A2
Voltage range		AC/DC  24-240V(50-60Hz)
Input		max.2VA
Supply voltage tolerance		-15%;+10%
Sensitivity(input resistance)		adjustable in range 5kΩ-100 kΩ
Voltage in electrodes		max.AC5V
Current in probe		AC<0.1 mA
Time response		max.400  ms
Max.capacity length		800  m(sensitivity  25kΩ),200  m(sensitivity  100  kΩ)
Max.capacity of probe cable		400  nF(sensitivity  25kΩ),100  nF(sensitivity  100  kΩ)
Time  delay(t)		adjustable,0.1-10s
Accuracy   in   setting(mechanical)		±10%
Temperature coecient		0.05%/℃,at=20℃(0.05%°F,at=68°F)
Output		1×SPDT
Current rating		10A/AC1
Switching voltage		250VAC/24VDC
Min.breaking capacity DC		500mW
Output indication		red LED
Mechanical life		1×10⁷
Electrical life(AC1)		1×10⁵
Reset time		max.200ms
Operating temperature		-20℃ to+55℃(-4°F to 131F)
Storage temperature		-35℃ to+75℃(-22°F to 158°F)
Mounting/DIN rail		Din rail EN/IEC 60715
Protection degree		IP40 for front panel/IP20 terminals
Operating position		any
Overvoltage cathegory		Ⅲ.
Pollution degree		2
Max.cable  size(mm²)		solid wire max.1×2.5or 2×1.5/with sleeve max.1×2.5(AWG 12)
Tightening torque		0.8Nm
Dimensions		90×18×64mm
Weight		70g                             72g
Standards		EN 62055-1

Panel Diagram