CJX2s series AC Contactor with novel appearance and compact structure is suitable for using starting & controlling the AC motor frequently, switching on and off the circuit at a long distance. It is used in combination with thermal relay to compose a magnetic motor starter.
Standard: IEC 60947-1, IEC 60947-4-1.
• Rated operation current(Ie): 9-110A
• Rated operation voltage(Ue): 220V~690V
• Rated insulation voltage: 690V
• Poles: 3P
• Auxiliary contacts: 1NO+1NC;
• Installation: Din rail and screw installation
• Standard: IEC 60947-1, IEC 60947-4-1
Type | Operating and Installation Conditions |
Installation category | III |
Pollution level | 3 |
Protection degree | CJX2s-09~38: IP20; CJX2s-40~95: IP10 |
Ambient temperature | limit of temperature: -35℃~+70℃,normal temperature: -5℃~+40℃,The average no more than +35℃ within 24 hours. |
Altitude | ≤2000m |
Ambient temperature | The maximum temperature is 70 degrees, the relative humidity of the air does not exceed 50%, and the temperature below 50% can allow higher relative humidity. If the temperature is 20℃, the air relative humidity could up to 90%, Special measures should betaken for occasional condensation due to humidity changes. |
Installation position | Inclination between installation surface and vertical surface should not exceed ±5° |
Shock vibration | Products should be installed and used without significant shake, shock and vibration. |
Derived products | Contactor | Accessory module | Picture | ||||
Time-delay Contactor |
|||||||
Reversing Contactor |
|||||||
Magnetic Starter |
|||||||
Front Auxiliary Contact | |||||||
Side Auxiliary Contact | |||||||
Changeover Capacitor AC Contactor |
|||||||
Dust Cover |