DR Electrical Industrial Power Supply for electronic devices

Product Detail

Single output DIN rail power supply Summary

single output: power 75W

Input voltage: 85~264VAC 120~370VDC

General Specification 55.5 × 125.2 × 100mm

ModelSpecification	DR-75-12	DR-75-24
DC output voltage, current	12V 0~6.3A	24V 0~3.2A
Wave and noise	100mVp-p	150mVp-p
Inlet wire stability	±0.5%	±0.5%
Load stability	±0.5%	±0.5%
Efficiency	76%	80%
Adjustable range for DC voltage	±10%	±10%
Input voltage range	85~264VAC 120~370VDC 47-63Hz
Impact current	Cold start current 20A/115VAC 40A/230VAC
Overload protection	105%~150% cut off the output, automtic recovery
Over voltage protection	121%-142% shutdownO/Pvoltage, re-poweronto recover
Setup, rise, hold up time	1000ms, 60ms, 60ms/230VAC at full load
Withstand voltage	I/P-O/P: 1.5kV I/P-FG: 1.5kV O/P-FG: 0.5kV 1minute
Isolation resistance	I/P-O/P I/P-FG O/P-F/G: 500VDC/100MΩ
Working temperature	-10℃~+50℃
Dimension	55.5×125.2×100mm

Single output DIN rail power supply Summary

single output: power 120W

Input voltage: 85~264VAC 120~370VDC

General Specification 65.5 × 125.2 × 100mm

ModelSpecification	DR-120-12	DR-120-24
DC output voltage, current	12V 0~10A	24V 0~5A
Wave and noise	85mVp-p	85mVp-p
Inlet wire stability	±0.5%	±0.5%
Load stability	±1%	±0.5%
Efficiency	80%	84%
Adjustable range for DC voltage	±10%	±10%
Input voltage range	85~264VAC 120~370VDC 47-63Hz
Impact current	Cold start current 20A/115VAC 40A/230VAC
Overload protection	105%~150% cut off the output, automtic recovery
Over voltage protection	120%-140% shutdownO/Pvoltage, re-poweronto recover
Setup, rise, hold up time	500ms, 70ms, 30ms/230VAC at full load
Withstand voltage	I/P-O/P: 1.5kV I/P-FG: 1.5kV O/P-FG: 0.5kV 1minute
Isolation resistance	I/P-O/P I/P-FG O/P-F/G: 500VDC/100MΩ
Working temperature	-10℃~+50℃
Dimension	65.5×125.2×100mm