SC(B)□ Series Dry-type Transformer

SC(B)口 Series Epoxy Resin Dry-type Transformer

The SC (B) series epoxy resin dry type transformers have the advantages of flame retardant, fireproof, explosion-proof, maintenance free, and small size due to their coils being encapsulated with epoxy resin. They can be directly installed in load centers and are widely used in power transmission and

transformation systems, as important places as commercial residences, public buildings, airports, as well as in harsh environments like subways, smelters, ships, and marine drilling.

Standard：IEC60076-1, IEC60076-11.

Selection

 

Operating conditions

1. Ambient temperature: maximum temperature: +40°C, minimum temperature: -25℃ .

2. Average temperature of the hottest month:+30℃, average temperature in the hottest year:+20℃ .

3. Altitude not exceeding 1000m.

4. The waveform of the power supply voltage is similar to a sine wave.

5. The three-phase supply voltage should be approximately symmetrical.

6. The relative humidity of the surrounding air should be lower than 93%.

7. And there should be no water droplets on the surface of the coil.

8. Where to use: indoors or outdoors.

 Features

1. The carefully designed coil structure and vacuum immersion treatment ensure that the SG (B) 10 transformer operates without.

partial discharge and will not exhibit crack performance throughout its service life. Its insulation level will remain in good condition as before.

2. The high-voltage part adopts continuous wire winding, low-voltage foil winding, vacuum immersion, curing treatment, and high-strength ceramic support, which has good resistance to sudden short circuit currents.

3. Flame retardant,explosion-proof, non-toxic, self-extinguishing, and fireproof.

4. The SG (B) 10 transformer produces almost no smoke when burned in a high-temperature open flame 5. The insulation level of the transformer is Class H (180℃).

6. The insulation layer is very thin, with strong short-term overload capacity, without the need for forced cooling, and can overload by 120% for long term use, 140% lasting for 3 hours. Due to its elasticity and non aging properties, this insulation material can be fully loaded at one time at ± 50℃ .

 

SCB9-30~2500/10KV technical data

Rated capacity (KVA)	Voltage combination			Connection group label	No-load loss(W)	Load   Loss(w) 120℃	No-load current (%)	Short circuit  impedance(%)	Dimensions			Total weight (kg)
	High voltage (KV)	Tapping range	Low voltage (KV)						L	W	H
30	6 6.3 6.6 10 10.5 11	±5 ±2×2.5	0.4	Dyn11 Yyn0	220	750	2.4	4	700	350	620	250
50					310	1060	2.4		710	350	635	295
80					420	1460	1.8		860	730	780	430
100					450	1670	1.8		940	710	795	520
125					530	1960	1.6		1000	710	860	670
160					610	2250	1.6		1080	710	1020	840
200					700	2680	1.4		1100	710	1060	960
250					810	2920	1.4		1150	710	1100	1120
315					990	3670	1.2		1150	770	1125	1230
400					1100	4220	1.2		1190	870	1175	1485
500					1310	5170	1.2		1230	870	1265	1580
630					1510	6220	1		1465	870	1245	1840
630					1460	6310	1	6	1465	870	1245	1840
800					1710	7360	1		1420	870	1395	2135
1000					1990	8610	1		1460	870	1420	2500
1250					2350	10260	1		1580	970	1485	2970
1600					2760	12400	1		1640	1120	1715	3900
2000					3400	15300	0.8		1780	1120	1710	4225
2500					4000	18180	0.8		1850	1120	1770	4790

Overall and mounting dimensions(mm)

Note:The dimensions and weights provided are only for reference in design and selection. The final size and weight are subject to our prodect drawings.

SCB10-30~2500/10KV technical data

Rated capacity (KVA)	Voltage combination			Connection group label	No-load loss(W)	Load   Loss(w) 120℃	No-load current (%)	Short circuit  impedance(%)	Dimensions			Total weight (kg)
	High voltage (KV)	Tapping range	Low voltage (KV)						L	W	H
30	6 6.3 6.6 10 10.5 11	±5 ±2×2.5	0.4	Dyn11 Yyn0	190	710	2	4	580	450	650	300
50					270	1000	2		600	450	650	380
80					370	1380	1.5		880	500	800	470
100					400	1570	1.5		970	500	820	560
125					470	1850	1.3		970	500	860	650
160					540	2130	1.3		980	650	950	780
200					620	2530	1.1		1000	650	970	880
250					720	2760	1.1		1040	760	1070	1030
315					880	3470	1.0		1100	760	1110	1250
400					980	3990	1.0		1170	760	1235	1400
500					1160	4880	1.0		1190	760	1250	1600
630					1340	5880	0.85		1220	760	1250	1900
630					1300	5960	0.85	6	1220	760	1250	1900
800					1520	6960	0.85		1330	760	1330	2580
1000					1770	8130	0.85		1350	920	1450	2850
1250					2090	9690	0.85		1440	920	1550	3200
1600					2450	11700	0.85		1510	1170	1620	3800
2000					3060	14400	0.7		1530	1170	1785	4280
2500					3600	17100	0.7		1560	1170	1930	5250

Overall and mounting dimensions(mm)

Note:The dimensions and weights provided are only for reference in design and selection. The final size and weight are subject to our prodect drawings.

SCB11-30~2500/10KV technical data

Rated capacity (KVA)	Voltage combination			Connection group label	No-load loss(W)	Load   Loss(w) 120℃	No-load current (%)	Short circuit  impedance(%)	Dimensions			Total weight (kg)
	High voltage (KV)	Tapping range	Low voltage (KV)						L	W	H
30	6 6.3 6.6 10 10.5 11	±5 ±2×2.5	0.4	Dyn11 Yyn0	170	710	2.3	4	955	750	840	270
50					240	1000	2.2		970	750	860	340
80					330	1380	1.7		1015	750	925	460
100					360	1570	1.7		1030	750	960	530
125					420	1850	1.5		1060	750	1000	605
160					480	2130	1.5		1090	900	1045	730
200					550	2530	1.3		1105	900	1080	825
250					640	2760	1.3		1180	900	1125	1010
315					790	3470	1.1		1225	900	1140	1165
400					880	3990	1.1		1330	900	1195	1490
500					1040	4880	1.1		1345	900	1255	1650
630					1200	5880	0.9		1540	1150	1175	1915
630					1170	5960	0.9		1540	1150	1175	1915
800					1360	6960	0.9	6	1600	1150	1220	2305
1000					1590	8130	0.9		1645	1150	1285	2690
1250					1880	9690	0.9		1705	1150	1345	3225
1600					2200	11700	0.9		1765	1150	1405	3805
2000					2740	14400	0.7		1840	1150	1475	4435
2500					3240	17100	0.7		1900	1150	1560	5300
1600					2200	12900	0.9	8	1765	1150	1405	3805
2000					2740	15900	0.7		1840	1150	1475	4435
2500					3240	18800	0.7		1900	1150	1560	5300

Overall and mounting dimensions(mm)

Note:The dimensions and weights provided are only for reference in design and selection. The final size and weight are subject to our prodect drawings.

SCB12-30~2500/10KV technical data

Rated capacity (KVA)	Voltage combination			Connection group label	No-load loss(W)	Load   Loss(w) 120℃	No-load current (%)	Short circuit  impedance(%)	Dimensions			Total weight (kg)
	High voltage (KV)	Tapping range	Low voltage (KV)						L	W	H
30	6 6.3 6.6 10 10.5 11	±5 ±2×2.5	0.4	Dyn11 Yyn0	150	710	2.3	4	955	750	840	270
50					215	1000	2.2		970	750	860	340
80					295	1380	1.7		1015	750	925	460
100					320	1570	1.7		1030	750	960	530
125					375	1850	1.5		1060	750	1000	605
160					430	2130	1.5		1090	900	1045	730
200					495	2530	1.3		1105	900	1080	825
250					575	2760	1.3		1180	900	1125	1010
315					705	3470	1.1		1225	900	1140	1165
400					785	3990	1.1		1330	900	1195	1490
500					930	4880	1.1		1345	900	1255	1650
630					1070	5880	0.9		1540	1150	1175	1915
630					1040	5960	0.9		1540	1150	1175	1915
800					1210	6960	0.9	6	1600	1150	1220	2305
1000					1410	8130	0.9		1645	1150	1285	2690
1250					1670	9690	0.9		1705	1150	1345	3225
1600					1960	11700	0.9		1765	1150	1405	3805
2000					2440	14400	0.7		1840	1150	1475	4435
2500					2880	17100	0.7		1900	1150	1560	5300
1600					1960	12900	0.9	8	1765	1150	1405	3805
2000					2440	15900	0.7		1840	1150	1475	4435
2500					2880	18800	0.7		1900	1150	1560	5300

Overall and mounting dimensions(mm)

Note:The dimensions and weights provided are only for reference in design and selection. The final size and weight are subject to our prodect drawings.

 

SCB12-30~2500/10KV technical data

Rated capacity (KVA)	Voltage combination			Connection group label	No-load loss(W)	Load   Loss(w) 120℃	No-load current (%)	Short circuit  impedance(%)	Dimensions			Total weight (kg)
	High voltage (KV)	Tapping range	Low voltage (KV)						L	W	H
30	6 6.3 6.6 10 10.5 11	±5 ±2×2.5	0.4	Dyn11 Yyn0	150	710	2.3	4	955	750	840	270
50					215	1000	2.2		970	750	860	340
80					295	1380	1.7		1015	750	925	460
100					320	1570	1.7		1030	750	960	530
125					375	1850	1.5		1060	750	1000	605
160					430	2130	1.5		1090	900	1045	730
200					495	2530	1.3		1105	900	1080	825
250					575	2760	1.3		1180	900	1125	1010
315					705	3470	1.1		1225	900	1140	1165
400					785	3990	1.1		1330	900	1195	1490
500					930	4880	1.1		1345	900	1255	1650
630					1070	5880	0.9		1540	1150	1175	1915
630					1040	5960	0.9		1540	1150	1175	1915
800					1210	6960	0.9	6	1600	1150	1220	2305
1000					1410	8130	0.9		1645	1150	1285	2690
1250					1670	9690	0.9		1705	1150	1345	3225
1600					1960	11700	0.9		1765	1150	1405	3805
2000					2440	14400	0.7		1840	1150	1475	4435
2500					2880	17100	0.7		1900	1150	1560	5300
1600					1960	12900	0.9	8	1765	1150	1405	3805
2000					2440	15900	0.7		1840	1150	1475	4435
2500					2880	18800	0.7		1900	1150	1560	5300

Overall and mounting dimensions(mm)

Note:The dimensions and weights provided are only for reference in design and selection.

The final size and weight are subject to our prodect drawings.

SCB18-30~2500/10KV technical data

Rated capacity (KVA)	Voltage combination			Connection group label	No-load loss(W)	Load   Loss(w) 120℃	No-load current (%)	Short circuit  impedance(%)	Dimensions			Total weight (kg)
	High voltage (KV)	Tapping range	Low voltage (KV)						L	W	H
30	6 6.3 6.6 10 10.5 11	±5 ±2×2.5	0.4	Dyn11 Yyn0 Dyn5	105	640	2	4	590	560	780	/
50					155	900	2		590	545	870	/
80					210	1240	1.5		720	620	845	/
100					230	1415	1.5		840	610	1005	/
125					270	1665	1.3		850	750	1010	/
160					310	1915	1.3		870	790	1010	/
200					360	2275	1.1		900	740	1020	/
250					415	2485	1.1		900	750	1060	/
315					510	3125	1		990	755	1110	/
400					570	3590	1		1020	780	1160	/
500					670	4390	1		1050	820	1150	/
630					775	5290	0.85		1240	890	1150	/
630					750	5365	0.85	6	1290	940	1100	/
800					875	6265	0.85		1300	920	1160	/
1000					1020	7315	0.85		1360	895	1195	/
1250					1205	8720	0.85		1420	920	1255	/
1600					1415	10555	0.85		1500	1010	1360	/
2000					1760	13005	0.7		1540	1010	1415	/
2000					2080	15445	0.7		1700	1120	1415	/

Overall and mounting dimensions(mm)

Note:The dimensions and weights provided are only for reference in design and selection.

The final size and weight are subject to our prodect drawings.

SCB-30~2500 technical data

Rated capacity (KVA)	Voltage combination			Connection group label	No-load loss(W)	Load   Loss(w) 120℃	No-load current (%)	Short circuit  impedance(%)	Dimensions			Total weight (kg)
	High voltage (KV)	Tapping range	Low voltage (KV)						L	W	H
50	20 10 6	±5 ±2×2.5	0.4	Dyn11 Yyn0 Dyn5	180	1500	1.8	4	1120	850	1000	/
100					252	1800	1.6		1160	850	1100	/
160					360	2600	1.4		1200	900	1150	/
250					468	3400	1.2		1250	900	1200	/
400					675	4500	1		1290	900	1200	/
630					990	7100	0.9		1340	900	1540	/
800					1170	8000	0.9	6	1400	900	1640	/
1000					1395	9000	0.8		1500	1200	1650	/
1250					1620	11000	0.8		1540	1200	1750	/
1600					1980	13000	0.8		1620	1200	1920	/
2000					2340	16000	0.6		1770	1200	2000	/
2500					2790	19000	0.6		1800	1200	2210	/
3150					3420	22000	0.6		1830	1200	2200	/

Overall and mounting dimensions(mm)

Note:The dimensions and weights provided are only for reference in design and selection.

The final size and weight are subject to our prodect drawings.

Carry

● The transformer is equipped with safe handling devices.

●  For transformers without enclosures and transformers with top door openings, use the four lifting lugs of the transformer for lifting (must be lifted vertically, not diagonally);

For transformers with 2 lifting lugs in the center of the top of the casing, use 2 lifting lugs for lifting. The angle formed by the

sling should not exceed 60° .

●  Firstly, the forking capacity of the forklift should be checked. If appropriate, the fork arm should be inserted into the base channel steel after removing the rollers.

●  Pulling and moving the transformer should be carried out from the base. For this purpose, holes with a diameter of 27 mm are made on each side of the base. Dragging is

possible in two directions: the axis of the base and the direction perpendicular to this axis.

Figure 1- Lifting with a sling or forklift                                           Figure 2- Installation of the roller